Technologies and Engineering

The method of calculating the energy saving effect from the application of the shunt active filter in the three-phase four-wire power system with the violation of its own losses

Keywords: power losses, shunt active filter, three-phase four-wire power supply system

Vladimir Bobrovnyk, Viktor Kaplun, Michael Artemenko

Suggested citation

Bobrovnyk, V., Kaplun, V., & Artemenko, M. (2018). The method of calculating the energy saving effect from the application of the shunt active filter in the three-phase four-wire power system with the violation of its own losses. Technologies and Engineering, 19(6), 9-19. https://doi.org/10.1109/5.771073

19.12.2018
432 Views
Technologies and Engineering - Vol. 19, No. 6, 2018

Analysis of the daily electricity consumption schedule optimization opportunities

Keywords: Smart grid, power supply, energy efficiency, demand management, DSM, daily graph unevenness

S. Denysiuk, V. Opryshko

https://doi.org/10.1109/5.771073

Suggested citation

Denysiuk, S., & Opryshko, V. (2018). Analysis of the daily electricity consumption schedule optimization opportunities. Technologies and Engineering, 19(6), 20-28. https://doi.org/10.1109/5.771073

19.12.2018
336 Views
Technologies and Engineering - Vol. 19, No. 6, 2018

Perceptron classifier of thermal comfort

Keywords: thermal comfort, neural networks, perceptron, hyperospaces of states, classification hyperplanes, vector-image of thermal comfort projection on a hyperplane

P. Yahanov, Anastasiia Redko

https://doi.org/DOI:10.30857/1813-6796.2018.6.3

Suggested citation

Yahanov, P., & Redko, A. (2018). Perceptron classifier of thermal comfort. Technologies and Engineering, 19(6), 29-38. https://doi.org/DOI:10.30857/1813-6796.2018.6.3

19.12.2018
440 Views
Technologies and Engineering - Vol. 19, No. 6, 2018

Investigation of the properties of styrene-acrylic polymer matrix to create a coating on cotton knitted fabric

Keywords: styrene-acrylic dispersion, polymer film, sol-gel method, hydrolytic stability, cotton knitted fabric, hygienic properties

Tatyana Asaulyuk, Olga Semeshko, Natalia Skalozubov, Yulia Saribyekova

https://doi.org/DOI:10.30857/1813-6796.2018.6.4

Suggested citation

Asaulyuk, T., Semeshko, O., Skalozubov, N., & Saribyekova, Y. (2018). Investigation of the properties of styrene-acrylic polymer matrix to create a coating on cotton knitted fabric. Technologies and Engineering, 19(6), 39-46. https://doi.org/DOI:10.30857/1813-6796.2018.6.4

19.12.2019
410 Views
Technologies and Engineering - Vol. 19, No. 6, 2018

Providing of increased wear resistance to fabrics for protective clothing

Keywords: textile material, finishing, wear resistance, mixture of polymers, polyurethane ionomer, pre-condensates of thermosetting resin

Tetyana Kulik, Anna Mishchenko, Olena Mishchenko, O. Venger, T. Popovych

https://doi.org/DOI:10.30857/1813-6796.2018.6.5

Suggested citation

Kulik, T., Mishchenko, A., Mishchenko, O., Venger, O., & Popovych, T. (2018). Providing of increased wear resistance to fabrics for protective clothing. Technologies and Engineering, 19(6), 47-55. https://doi.org/DOI:10.30857/1813-6796.2018.6.5

19.12.2018
370 Views
Technologies and Engineering - Vol. 19, No. 6, 2018

Deformation characteristics of high strength knitted fabrics

Keywords: industrial knitwear, polyethylene yarn, polyamide yarn, protective products, highstrength knitwear, deformation characteristics

Svitlana Bobrova, Liudmyla Halavska, A. Kulyk

https://doi.org/10.1109/5.771073

Suggested citation

Bobrova, S., Halavska, L., & Kulyk, A. (2018). Deformation characteristics of high strength knitted fabrics. Technologies and Engineering, 19(6), 56-63. https://doi.org/10.1109/5.771073

19.12.2018
433 Views
Technologies and Engineering - Vol. 19, No. 6, 2018

Polymer-polymer composite based on waste EVA

Keywords: polyvinyl chloride, EVA, mixed waste, grinding, polymer-polymer composite

B. Savchuk, Bohdan Savchenko, Nadiya Sova, I. Kostiuk

https://doi.org/DOI:10.30857/1813-6796.2018.6.7

Suggested citation

Savchuk, B., Savchenko, B., Sova, N., & Kostiuk, I. (2018). Polymer-polymer composite based on waste EVA. Technologies and Engineering, 19(6), 64-70. https://doi.org/DOI:10.30857/1813-6796.2018.6.7

19.12.2018
363 Views
Technologies and Engineering - Vol. 19, No. 6, 2018

Correlation between electrochemical properties of the welded joint of aluminium alloy of the Al-Mg-Cu-Si system and its resistance to local corrosion

Keywords: aluminum alloy of the Al-Mg-Cu-Si alloying system, welded joint, electrochemical properties, intergranular corrosion

Liudmyla Nyrkova, Tetyana Labur, O. Riabyko, Yuliya Borysenko

https://doi.org/DOI:10.30857/1813-6796.2018.6.8

Suggested citation

Nyrkova, L., Labur, T., Riabyko, O., & Borysenko, Y. (2018). Correlation between electrochemical properties of the welded joint of aluminium alloy of the Al-Mg-Cu-Si system and its resistance to local corrosion. Technologies and Engineering, 19(6), 71-77. https://doi.org/DOI:10.30857/1813-6796.2018.6.8

19.12.2018
365 Views
Technologies and Engineering - Vol. 19, No. 6, 2018

Study of the method of cleaning of technological equipment of pharmaceutical and chemical manufactures using a micellar dezaktivation system

Keywords: decontamination, organophosphorus compounds, efficiency, method of purification of equipment, hard source of hydrogen peroxide, toxic substances

Volodymyr Bessarabov, Liubov Vakhitova, Galyna Kuzmina, V. Vasylenko

https://doi.org/DOI:10.30857/1813-6796.2018.6.9

Suggested citation

Bessarabov, V., Vakhitova, L., Kuzmina, G., & Vasylenko, V. (2018). Study of the method of cleaning of technological equipment of pharmaceutical and chemical manufactures using a micellar dezaktivation system. Technologies and Engineering, 19(6), 78-85. https://doi.org/DOI:10.30857/1813-6796.2018.6.9

19.12.2018
414 Views
Technologies and Engineering - Vol. 19, No. 6, 2018

Investigation of the kinetics of releasing of decamethoxin antimicrobic drugs from medical application polymeric films

Keywords: kinetics, antiseptics, decamethoxin, polymer films, modified starch, prolonged action

Olena Ishchenko, Volodymyr Bessarabov, Viktoria Plavan, Olga Baula, I. Resnytskyi, S. Cherkas

https://doi.org/DOI:10.30857/1813-6796.2018.6.10

Suggested citation

Ishchenko, O., Bessarabov, V., Plavan, V., Baula, O., Resnytskyi, I., & Cherkas, S. (2018). Investigation of the kinetics of releasing of decamethoxin antimicrobic drugs from medical application polymeric films. Technologies and Engineering, 19(6), 86-94. https://doi.org/DOI:10.30857/1813-6796.2018.6.10

19.12.2018
299 Views
Technologies and Engineering - Vol. 19, No. 6, 2018

Issue

Vol. 19, No. 6, 2018

All articles from the issue

The method of calculating the energy saving effect from the application of the shunt active filter in the three-phase four-wire power system with the violation of its own losses

Analysis of the daily electricity consumption schedule optimization opportunities

Perceptron classifier of thermal comfort

Investigation of the properties of styrene-acrylic polymer matrix to create a coating on cotton knitted fabric

Providing of increased wear resistance to fabrics for protective clothing

Deformation characteristics of high strength knitted fabrics

Polymer-polymer composite based on waste EVA

Correlation between electrochemical properties of the welded joint of aluminium alloy of the Al-Mg-Cu-Si system and its resistance to local corrosion

Study of the method of cleaning of technological equipment of pharmaceutical and chemical manufactures using a micellar dezaktivation system

Investigation of the kinetics of releasing of decamethoxin antimicrobic drugs from medical application polymeric films

Address

Email

Useful links