Technologies and Engineering
Technologies and Engineering
ISSN 2786-5371 e-ISSN 2786-538X
DOI: 10.30857/2786-5371
Submit an article

Author

Viktor Malyshev

Open University of Human Development "Ukraine"

03115, 23 Lvivska Str., Kyiv, Ukraine

https://orcid.org/0000-0003-2756-3236

All articles

open access

Keywords: kinematic pairs; maximum reaction values; connecting rod; complex spatial motion

Kinetostatic studies of hinged spatial mechanisms of gallting machines (part 1: research of the mechansm with an additional mobile rocker link)

Mark Zaliubovskyi, I. Panasiuk, Viktor Malyshev, Vladyslava Skidan

https://doi.org/10.30857/1813-6796.2021.1.1

Suggested citation

Zaliubovskyi, M., Panasiuk, I., Malyshev, V., & Skidan, V. (2021). Kinetostatic studies of hinged spatial mechanisms of gallting machines (part 1: research of the mechansm with an additional mobile rocker link). Technologies and Engineering, 22(1), 9-18. https://doi.org/10.30857/1813-6796.2021.1.1
Read more
  • 24.02.2021
  • 430 Views
  • Technologies and Engineering - Vol. 22, No. 1, 2021
open access

Keywords: excess communication, seven-link spatial mechanism, reciprocating movement, working capacity

Machine for processing parts with a seven-link spatial mechanism – synthesis and research

Mark Zaliubovskyi, I. Panasiuk, Viktor Malyshev

https://doi.org/10.1109/5.771073

Suggested citation

Zaliubovskyi, M., Panasiuk, I., & Malyshev, V. (2020). Machine for processing parts with a seven-link spatial mechanism – synthesis and research. Technologies and Engineering, 21(4), 38-47. https://doi.org/10.1109/5.771073
Read more
  • 23.09.2020
  • 373 Views
  • Technologies and Engineering - Vol. 21, No. 4, 2020
open access

Keywords: complex spatial motion, working capacity, kinematic parameters, translational acceleration, translational speed

Study of kinematic parameters of a machine for processing parts with two capacities executing complex spatial movement

Mark Zaliubovskyi, I. Panasiuk, Viktor Malyshev

https://doi.org/DOI:10.30857/1813-6796.2020.3.2

Suggested citation

Zaliubovskyi, M., Panasiuk, I., & Malyshev, V. (2020). Study of kinematic parameters of a machine for processing parts with two capacities executing complex spatial movement. Technologies and Engineering, 21(3), 25-36. https://doi.org/DOI:10.30857/1813-6796.2020.3.2
Read more
  • 30.06.2020
  • 298 Views
  • Technologies and Engineering - Vol. 22, No. 3, 2020
open access

Keywords: casting, separations from gullies, lightning lock, mode of working array motion

Experimental study of the influence of working array movement modes and volume of filling on the separation intensity of metal details from sprues

Mark Zaliubovskyi, I. Panasiuk, Viktor Malyshev

https://doi.org/DOI:10.30857/1813-6796.2020.1.3

Suggested citation

Zaliubovskyi, M., Panasiuk, I., & Malyshev, V. (2020). Experimental study of the influence of working array movement modes and volume of filling on the separation intensity of metal details from sprues. Technologies and Engineering, 21(1), 27-37. https://doi.org/DOI:10.30857/1813-6796.2020.1.3
Read more
  • 26.02.2020
  • 346 Views
  • Technologies and Engineering - Vol. 21, No. 1, 2020
open access

Keywords: separation from gates, «zipper» lock, volumetric processing, working capacit

Analytical determination of time of performance of a technological operation separation of metal details of the «zipper» lock from a gate

Mark Zaliubovskyi, I. Panasiuk, Viktor Malyshev

https://doi.org/DOI:10.30857/1813-6796.2019.6.1

Suggested citation

Zaliubovskyi, M., Panasiuk, I., & Malyshev, V. (2019). Analytical determination of time of performance of a technological operation separation of metal details of the «zipper» lock from a gate. Technologies and Engineering, 20(6), 9-18. https://doi.org/DOI:10.30857/1813-6796.2019.6.1
Read more
  • 19.12.2019
  • 333 Views
  • Technologies and Engineering - Vol. 20, No. 6, 2019
open access

Keywords: separation from gates, “zipper” lock, mechanical energy, working capacity

Experimental determination of energy required for separation of metal parts from sprues

Mark Zaliubovskyi, I. Panasiuk, Viktor Malyshev

https://doi.org/10.1109/5.771073

Suggested citation

Zaliubovskyi, M., Panasiuk, I., & Malyshev, V. (2019). Experimental determination of energy required for separation of metal parts from sprues. Technologies and Engineering, 20(5), 17-25. https://doi.org/10.1109/5.771073
Read more
  • 23.10.2019
  • 375 Views
  • Technologies and Engineering - Vol. 20, No. 5, 2019
open access

Keywords: separation from sprues, "lightning" lock, metal parts, working capacity

Determination of the rotational speed of the drive shaft a machine for processing parts: the energy approach

Mark Zaliubovskyi, I. Panasiuk, Viktor Malyshev

https://doi.org/DOI:10.30857/1813-6796.2019.4.6

Suggested citation

Zaliubovskyi, M., Panasiuk, I., & Malyshev, V. (2019). Determination of the rotational speed of the drive shaft a machine for processing parts: the energy approach. Technologies and Engineering, 20(4), 57-65. https://doi.org/DOI:10.30857/1813-6796.2019.4.6
Read more
  • 25.09.2019
  • 355 Views
  • Technologies and Engineering - Vol. 20, No. 4, 2019
open access

Keywords: polishing, working container, free abrasive in the form of granules, polymeric units

Analytical determination of the time of handling process of polymeric parts in a machine with a complex movement of working container

Mark Zaliubovskyi, I. Panasiuk, Maxim Smirnov, Olena Kuznietsova, Viktor Malyshev

https://doi.org/10.1109/5.771073

Suggested citation

Zaliubovskyi, M., Panasiuk, I., Smirnov, M., Kuznietsova, O., & Malyshev, V. (2019). Analytical determination of the time of handling process of polymeric parts in a machine with a complex movement of working container. Technologies and Engineering, 20(3), 9-17. https://doi.org/10.1109/5.771073
Read more
  • 25.06.2019
  • 385 Views
  • Technologies and Engineering - Vol. 20, No. 3, 2019
open access

Keywords: redundant communication, statically defined spatial mechanism, rotational motion, working capacity, crank

Synthesis and analytical investigations of geometric parameters of a statically determined spatial hinged mechanism of a handling machine

Mark Zaliubovskyi, I. Panasiuk, Viktor Malyshev

https://doi.org/DOI:10.30857/1813-6796.2020.5.2

Suggested citation

Zaliubovskyi, M., Panasiuk, I., & Malyshev, V. (2020). Synthesis and analytical investigations of geometric parameters of a statically determined spatial hinged mechanism of a handling machine. Technologies and Engineering, 21(5), 24-30. https://doi.org/DOI:10.30857/1813-6796.2020.5.2
Read more
  • 28.10.2020
  • 343 Views
  • Technologies and Engineering - Vol. 21, No. 5, 2020
open access

Keywords: polishing, working capacity, free abrasive in the form of granules, polymeric units

Experimental investigation of the handling process of polymeric units in a machine with a compacted space movement of working capacity

Mark Zaliubovskyi, I. Panasiuk, Maxim Smirnov, Yuriy Klaptsov, Viktor Malyshev

https://doi.org/DOI:10.30857/1813-6796.2019.2.2

Suggested citation

Zaliubovskyi, M., Panasiuk, I., Smirnov, M., Klaptsov, Yu., & Malyshev, V. (2019). Experimental investigation of the handling process of polymeric units in a machine with a compacted space movement of working capacity. Technologies and Engineering, 20(2), 24-32. https://doi.org/DOI:10.30857/1813-6796.2019.2.2
Read more
  • 24.04.2019
  • 325 Views
  • Technologies and Engineering - Vol. 20, No. 2, 2019